PCIe Power Pin Layout: Best Practices

PCIe power connector cable

PCIe power connector cable

Peripheral Component Interconnect Express (PCIe) cards and connectors have been commonly used in many electronics products; such as computers and peripherals, for many years. The PCIe designation was introduced in 2003 by PCI-SIG, the Peripheral Component Interconnect Express Special Interest Group. The group is comprised of primarily microelectronics industry companies and seeks to establish compliance specifications to ensure reliable operation between devices that utilize PCIe components.

PCIe cards are often used in computers and other devices as expansion slots to add functionality and/or capability. PCIe connectors are used to connect to peripherals; however, they are also used to connect internal system elements. One of the chief internal usages is to supply power to boards and other devices. To ensure reliable operation, it is important to employ best practices for PCIe power pin layout design.

Types of PCIe Power Connectors

The most commonly implemented PCIe power connectors are the 6-pin and 8-pin, listed below.

COMMON PCIe POWER PIN CONNECTORS

Attributes

PCIe 6-pin 

PCIe 8-pin 

Board to connector perspective

PCIe 6-pin

PCIe

Connector pinout

 

Pin Number

Usage

1

12V

2

NC

3

12V

4

Ground

5

Sense

6

Ground

 

Pin Number

Usage

1

12V

2

12V

3

12V

4

Sense1 

5

Ground

6

Sense0

7

Ground

8

Ground

Specified/Rated Power*

75 W

150/288 W

* Specified is the power standard by PCI-SIG. Rated power is the device power rating.

As shown above, the 6-pin PCIe connectors provide two 12 V sources for DC power, while the 8-pin connectors deliver three 12 V ports for power draw. The sense pins are important as they inform the card or device that power is available, and at what level. For example, low Sense and Sense1, for 6-pin and 8-pin, respectively, indicate 75W, while low Sense1 indicates 150 W for 8-pin connections.

As power requirements for computing systems and other devices have increased, the use of multiple 6- or 8-pin power cables has grown. Additionally, the 12V-2×6, a revision of the 12VHPWR connector specification introduced in 2022, specifically to address the high-power needs of graphics processing units (GPUs), provides up to 600 W as specified by PCI-SIG for compliance.

PCB Design for PCIe Components

When designing circuit boards that utilize PCIe components, it is important to follow good PCIe routing guidelines. These include careful consideration of the following:

Important PCIe Power Pin Layout Design Considerations

  • Component spacing
    • Following component spacing standards is critical to prevent interference between power and signal traces that can disrupt operation and significantly degrade board performance.
  • Trace spacing and clearance
    • Many PCIe devices carry high-speed signals; therefore, it is essential that adequate trace spacing and clearance rules and guidelines are followed.
  • Electromagnetic interference (EMI)
  • Thermal analysis
    • Another important consideration for high-power devices and PCBs is excess heat. High heat without adequate dissipation can lead to component and/or board damage. Therefore, performing thermal analysis for components and power distribution network (PDN) simulation is highly recommended.

Incorporating the guidelines above into your design process will help you avoid contingencies that may be rooted in PCIe power pin layout issues.

Ensuring Accurate PCIe Power Pin Layout

PCIe boards and connectors perform invaluable functions in and between electronic devices and systems. PCIe connectors provide engineers and PCB designers with a standardized, yet flexible means of ensuring adequate power is available and reliably transferred to high-performance components and devices. Realizing the benefits of these components requires following guidelines for PCIe power pin layout design, as listed below.

Guidelines for PCIe Power Pin Layout Design

  • Only choose PCIe components and connectors that comply with industry-standard specifications

  • Only use manufacturer-vetted CAD models

  • Route tracing according to industry standard rules and guidelines

  • Prioritize EMI minimization

  • Employ necessary analyses; such as thermal and PDN simulation

By employing the list of guidelines above, you are significantly reducing the possibility of any performance or reliability issues during the lifecycle of your board due to PCIe component or connector concerns.

If you’re looking for CAD models for common components or important design information like how to best design your PCIe power pin layout, Ultra Librarian helps by compiling all your sourcing and CAD information in one place.

Working with Ultra Librarian sets up your team for success to ensure streamlined and error-free design, production, and sourcing. Register today for free.

UL-Icon.png

The Ultra Librarian Team

Ultra Librarian offers the world’s largest PCB CAD library, putting cutting-edge materials at your fingertips so you can build better products faster—all for free.

Join Our Newsletter

Subscribe to our newsletter to receive the latest news, and important updates

Name(Required)

Related Posts

If you’re looking for any of our component footprints or models, we have readily available and free options for you and your design team. Search our library for the solution you’ve been looking for.

IC Manufacturers

Working with us allows you to target the right audience for your component, provide content to nurture them along their design process, and analyze how your parts are being received and used.

Electronic Component Industry Trends 2024

Download Now to read more about the most impactful drivers of IC component innovation.

Part Details

Pricing by

Free Design Resources

Ultra Librarian is the worlds largest online – and always free – PCB CAD library. Build products better, faster, and more accurately with easy access to vendor-verified symbols, footprints, and 3D models. Register today to start searching the right components for your next design.

Recommended